Home » Energy Solutions
Green homes start with practical design choices. In Hawke’s Bay, insulation, glazing and shading can help you stay comfortable through hot summers and cooler winters.
For a new home, we consider those choices alongside the layout and orientation. If you are renovating, we can discuss which upgrades suit your existing home and budget.
Below, we explain LED lighting, insulation, power plans, solar panels, hot water heat pumps and thermal mass. You can also read how we design eco homes.
LED lights generally use less energy and last longer than traditional incandescent bulbs. We use LED lighting in new homes. For a renovation, we can help you plan where task lighting and softer lighting will work best.
Insulation helps slow the movement of heat through your home. In a new build, we look at the roof, walls, glazing and floor together. For example, an insulated slab edge can help reduce heat loss at the perimeter.
In an existing home, the ceiling and accessible underfloor areas are often worth investigating first. Ask what can be improved safely before you open up walls or change the ventilation.
For some new builds, we use insulated foundation systems such as MAXRaft. Jason can help you compare options for your section and budget.
Some electricity plans offer lower prices during off-peak periods. For example, Electric Kiwi publishes the terms of its Hour of Power. Check the current terms and compare the rest of the tariff before choosing a plan.
Depending on your hours and appliances, you could shift tasks such as running the dishwasher or washing machine. The example chart below illustrates the idea. Your results depend on when you use power and what your retailer charges.
Solar panels generate electricity during daylight hours. How much they save depends on your roof, system size, electricity plan and how much of the power you use at home.
For example, check your roof’s orientation, shade and usable space. Then compare the times you use the most electricity. EECA’s guide to planning a home solar system explains how those factors affect your choice.
In a grid-tied system, your home can use the power the panels produce. If the system generates more than the house needs, it may send the surplus to the grid. The price your retailer pays for that power depends on your plan.
However, using more solar power at home can make a difference. For example, you could run the dishwasher during the day when the panels are generating.
We commonly specify the Rinnai HydraHeat Split hot water heat pump in our new homes. The outdoor heat pump works with a compatible hot water cylinder, which gives us flexibility when planning where the equipment goes.
Jason can discuss the right setup for your household, site and budget as part of the design and pricing process.
The chart is an illustration only. Actual running costs vary with your household’s hot-water use, energy tariff and equipment. Ask Jason about options for your home.
Dense materials such as concrete and brick can absorb and store heat. In winter, a sunny concrete floor can release some of that warmth later in the day.
In summer, shading helps keep direct sun off the same floor. How well this works depends on where the sun enters, how you shade the windows and how you ventilate the home. The diagram below shows the idea.
As noted on the diagram the building is insulated, shading cuts out the sun to avoid too much heat, and the thermal mass absorbs heat energy, releasing it at night to keep your house warm.
In Winter the sun is allowed to penetrate creating natural warmth, and the thermal mass will hold and store heat and slowly emit it. Heat loss through windows, walls, the roof and the ceiling is minimised.